SkyRc SkyRC Charger D100 AC/DC DUO Li-Po 1-6s 2x100W

The SKYRC D100 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.

Features:

Tilt Stand Design: The tilt stand can support the chargers at different tilt angles so that the users can get best operational experience.
Twin-channel Charger: SKYRC D100 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 batteries at once.
Power Distribution: In AC mode, it supports power distribution, for example, Channel A-70W, then Channel B-30W, the total power is 100W.
LIHV Mode Available: The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.

Optional Charge Master Software

With these software the user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".

Optional Smart Phone App

Smart Phone Control via Wi-Fi Module (both iOS and Android)
This charger can be controlled and operated by smart phones via Wi-Fi module (optional part SK-600075).

Technical Data

Input Voltage: AC 100-240V / DC 11-18V
Charge Circuit Power: DC Input 2 x 100W
AC Input: 100W (Support Power Distribution)
Discharge Circuit Power: 2 x 10W
Charge Current: 0.1 - 10.0A
Discharge Current: 0.1 - 5.0A
Current Drian for Balancing Port: Max. 200mA / cell
Trickle Charging Current: 30mA - 300mA & OFF
Display Backlight: Blue
Case Material: Plastic
Maximum Cells: LiPo/LiFe/LiIon: 1-6 cells | NiMH/NiCd: 1-15 cells | Pb: 2-20V
Weight: 975g
Dimensions (LxWxH): 153x163x72mm

Scope of supply:

D100 Charger
Power plug for socket
2x Charging wire without plug
2x XT-60 Charging Wire
2x Balancer Adapter XH Type for 2-6S Lipos
Instruction manual english