Team Associated Reflex 14B Ready-To-Run:
Team Associated's 1:14 scale REFLEX 14B 4WD electric buggy comes out of the box already assembled, with a Reedy Power brushless speed control and motor, high-torque digital steering servo, and 2.4GHz radio system. With all that power at your disposal, the buggy's design effortlessly channels it into 4WD fun! The adjustability offered by the turnbuckles, caster blocks, and rear hubs make the REFLEX 14B ready for any terrain you can throw at it. Additional features include three sealed differentials, aluminum steering rack, and lightweight aluminum center driveshaft. Adding a battery pack of your choice to the REFLEX 14B RTR, you can now have big performance in a small-scale Ready-to-Run package!
Features2.4GHz 2-channel radio system
High-Torque Digital Servo with spring-style servo saver
Powerful Reedy 4500kV Brushless Motor
Water-resistant high-power Reedy brushless speed control with T-plug connector
Three sealed differentials
Threaded, coil-over shock absorbers
Adjustable turnbuckles
Adjustable inserts for caster blocks and rear hubs
Aluminum steering rack
Front universal driveshafts
Sleek and stylish race-inspired body
Molded tub chassis with covered center driveshaft
Aluminum center driveshaft
12mm drive hex
Absima Charger Cube 2.0 - Laturi:
NiMH/LiPo Charger "CUBE 2.0" FEATURES:
A "easy-to-use" charger which is especially suitable for beginners. The uncomplicated setting options make it easy to operate and it`s suitable for LiPo/LiFe and NiMH/NiCd batteries. The unit features a selectable charging rate, delta-peak sensitive cut-off and cell balancing of LiPo/LiFe batteries.
AC power cable available with Euro pin plug (4000033)
SPECIFICATION:
Input voltage: 100-240V AC Charging current: 1.0A / 3.0A / 5.0A (50W) Charging output: 4mm sockets LED for battery type identification and status LiPo/LiFe batteries: 2-3S NiMH/NiCd: 1-8 cells Balancing current: 350mAh Delta-peak sensitive Internal power suply Dimmension: 110x109x49 mm Weight: 490 g
SCOPE OF DELIVERY:
Cube 2.0 Charger AC power cable LiPo/LiFe balancing board Charging cable with T-plug Charging cable with Tamiya plug Manual
Team Orion LiPo 1600 2S 7,4V 50C Deans:
Knowing the charge status of your LiPo batteries is important but
it also requires that you have the equipment with you to do it. To
make your life easier, we have designed a simple LED voltmeter and
integrated it directly into the LiPo battery design. This way you
don’t have to worry about carrying extra electronics. To find out
the charge status of your battery, simply press the button located
on the circuit board and check the LED readout. The LED will
indicate if the battery is fully charged, 75% charged, 50% charged
(for storage) or empty. The latest lithium polymer battery
technology has been used for this new range of softcase batteries.
They can handle discharge rates of up to 50C and charge rates of up
to 5C, offering outstanding performance for all applications. These
batteries are available in variety of capacities, sizes and
connectors.
Innovative LED Charge Status Control System
Up to 50C Discharge Rate
Up to 5C Charge Rate
Wide range of capacities, configurations and connectors
Latest Lithium Polymer technology
Improved Cycle Life and Cell stability
Brand: Team Orion
Application: Plane, Boat, Competition,Helicopter, Hobby,
Multicopter, Car
Capacity: 1600mAh
Connector Type: Deans
Max Charge Current: 5C
Max Charge Current (A): 8A
Max Continuous Discharger: 80A
Max Burst Discharge: 160A
C-Rate: 50C
Height: 19mm
Width: 31mm
Length: 94mm
Weight: 108g
S / Voltage: 2S - 7.4V
Style: Softcase
Type: Lipo
EAN Code: 7612888601380
Product code: ORI60138
+