ARRMA RC Kraton 6S 2018 4WD BLX 1/8 RTR with 6s battery and charger

ARRMA RC KRATON 6S 4WD BLX v5:

It doesn't get much better than the ARRMA Kraton V5 6S BLX. The latest version of the 1/8th scale speed monster truck Kraton by ARRMA offers market leading performance at your fingertips right out of the box. When you squeeze that throttle you're going to notice exactly how far this race-inspired monster truck platform has come. On 6S this beast of a speed monster truck can do 96km/h+ without any crazy modifications.

With the ancestor of the car being a race-bred machine, the handling of this truck is unmatched in the monster truck category. You're going to need all those handling capabilities when the powerful Spektrum Smart electronics underneath that aggressive body really get to work. The speeds this truck achieves are nothing short of breathtaking. At such speeds the suspension is going to have to be just right, luckily with this truck, it definitely is.

If you're out and about bashing the car hard, and feel like you'd need some different handling characteristics for that specific terrain, that is achievable too without breaking the bank buying potentially expensive aftermarket parts. There are lots of adjustments you can make to the car without spending your hard-earned money. A bottle or two of shock oils will go a long way. You can also adjust a lot of things just with a hex driver and a wrench. These features make the car even more versatile than it already is right out of the box.  

With the market evolving fast it's easy to make wrong decisions and end up with a car that disappoints you. The ARRMA Kraton V5 6S BLX will not disappoint you. Why settle for less, when you can get the best?

Scale: 1/8

Top speed: 60+mph / 96+km/h

Electornics: Brushless

Assembly status: RTR, fully assembled

Part number: ARA8608V5T1(Red), ARA8608V5T2 (Blue)

Drive type: 4WD

Vehicle type: Speed Monster Truck

Intended terrain: Off-road

Length: 594mm / 23.39"

Wheelbase: 377mm / 14.84"

Ride height: 47mm / 1.85"

Front width: 460mm / 18.11"

Rear width: 460mm / 18.11"

Height: 195mm / 7.68"

Number of differentials: 3

Weight (without battery): 4.5kg / 9lbs 15oz

Battery compartment size: 158x51x46mm / 6.22x2.01x1.81"

Needed to complete:
LiPo-Battery (3S,4S or 6S)
LiPo-charger
4 AA batteries for transmitter

Team Orion TEAM ORION Advantage ONE 1X6A EU Plug:
Team Orion's Advantage ONE 1X6A is a very easy to use charger that offers tremendous charging power at an affordable price. It charges LiPo/LiFe/LiHv batteries up to 6S and Nimh at an adjustable charge rate between 0.1 and 10A


The Advantage ONE 1X6A charger in a few words

The Advantage ONE 1X6A is an entry-level high power AC charger that can be used to charge Lipo batteries from 1S to 6S, NIMH batteries from 1 to 15 cells and PB batteries from 2 to 20V. The charging current is selectable from 0.1 to 10A with a maximum charging power of 80 Watt. The Advantage ONE 1X6A can charge almost any type of battery chemistry; Li-Fe, Li-Ion, Li-Po, Li-HV, Ni-MH, Ni-Cd and PB. The LCD display provides all the information needed to navigate the different programs. The Advantage ONE 1X6A has several great features that are only found in high-end battery chargers.


Advantage ONE 1X6A charger features

Up to 6S cell balancing port
High quality 2 x 16" backlit LCD display
Cooling fan
Can charge Li-Ion, Li-Po and Li-Fe batteries from 1 to 6S
Can charge Ni-MH batteries from 1 to 15 cells (1.2V - 18V)
Can charge PB batteries from 1 to 10 cells (2V - 20V)
Different charging, discharging and storage programs
Can measure the internal resistance of your battery
Can measure and monitor the voltage of each cell during charging
With all necessary safety features: short circuit protection, reverse polarity protection, etc.
Versatile charger for LiPo/LiFe up to 46S and Nimh up to 18V.
80 watts of power

Robitronic LiPo Battery 4500 mAh 6S 40C EC5 Plug:

Please note! This battery comes with EC5 connector.

Robust and reliable Competition Racing Pack, protected in a sturdy hard case and safe from mechanical damage. The connection and balancing cables can be lead out at the front or upper side.

Technical Specification:

Cells/Voltage: 6s/22.2V
Capacity: 4500mAh
Discharge rate max: 40C
Weight: 586g
Dimension: 138x46x48mm
Connector: EC5
Balancer Connector: XH
Wire: 12AWG
Wire Length: 100mm

ValueRC Ec5 Plug To 4.0Mm Banana Connector 12Awg 30Cm Charging Cable Wire:

Laadukas EC5 latausjohto. Tällä saat ladattua kaikki XT-90 olevat akut laturilla missä on normaali 4mm liitin.

Pituus 30cm

ValueRC LiPo Bag - Lipopussi - Latauspussi:

Sopiva LiPo pussi kaikille normaalikokoisille akuille!

LiPo pussiin mahtuu 3-4 normaalikokoista akkua.

Kätevät tarranauhat ja sopiva koko tekee käytöstä helppoa. Täällä säilytät kätevästi ja turvallisesti akut.

Mitat: 185mm x 75mm x 60mm

Miksi LiPo pussi?

LiPo akut ovat tehty Lithiumista joka väärin käytettynä palaa agressiivisesti. Lähes kaikki nykypäivän akut kuten puhelimen ja tietokoneen akut ovat tehty Lithiumista mutta RC käytössä akut ovat kovassa käytössä ja laturit ovat monesti tehokkaampia. Kunhan muistat ladata LiPo akun älylaturilla balansointi ohjelmalla niin mitään ei pitäisi tapahtua, mutta turvallisuuden vuoksi kannattaa akku ladata LiPo pussissa joka suojaa tulipalolta jos vahingossa lataat väärällä ohjelmalla ja väärin kytkettynä tai akku on vaurioitunut.

Huom. LiPo pussit saattavat vaatia että käytät akussa tasauksen jatkojohtoa jotta akun tasausjohto yltää laturiin hyvin:

Products‪»Electronics‪»Cables, adapters and connectors‪»

Balancingboards and extension cables

 

ValueRC Lipo Battery Balance Charging Extension Wire Cable 20cm 6S 22AWG:
Kätevä balansointi jatkojohto 6s akulle.

Tällä saat paremmin liikkumisvaraa akulle latausvaiheessa. Lähes pakollinen apu kun latailet LiPo pussin kanssa.

XH-liitin, eli yleisin malli.

Paketissa 1 kpl.

Dusty Motors Shroud Cover - Arrma Kraton/Talion (Shock cover not included):
Fits: Arrma Kraton/Talion only.

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.

Features:


Shroud comes with a zipper
Genuine adhesive VELCRO® tape included
Hand made with a very strict quality inspection
Easy installation
MADE IN EUROPE