Huippusuositun ARRMA Big Rock BLX auton harjaton 3s LiPo paketti kunnollisella 5000mAh akulla ja hyvällä älylaturilla.
Laturi lataa akun täyteen noin tunnissa ja 5000mAh akku tarjoaa pitkää ajoaikaa. 3s akku tarjoaa maksimaalisen tehon autoon, tällä akulla saat auton kulkemaan 80-100km/h riippuen välityksestä!
ARRMA RC BIG ROCK 223S DSC 4X4 RTR Brushless Monster Truck:
Product Details
Blast into brushless truck bashing with the scale realism, dirt-chucking performance, and 50+ mph speed potential of the ARRMA BIG ROCK 223S BLX 4X4. Advance from 2S to 3S power as your experience grows - without buying upgrades or changing vehicles.Key Features
2S and 3S ready, for brushless beginner to pro-level speeds
Spektrum DSC (Dynamic Stability Control) and throttle limiting keep you in control
Heavy-duty transmission and all-terrain suspension
Detailed truck body with clipless body retention system
Ready-to-run - just add battery and charger
In The Box
(1) BIG ROCK 223S BLX 4X4 1/10 Scale Crew Cab Monster Truck RTR
(1) Spektrum SLT 80A 2-in-1 Waterproof ESC & Receiver 2S/3S with DSC
(1) Spektrum 3100Kv Brushless Motor
(1) Spektrum SLT3 2.4GHz Transmitter (1) Spektrum S662 Metal-Geared 25T Waterproof Digital Servo
(4) AA Batteries
(1) Instruction Manual
*For details on waterproof standards, please refer to the product instruction manuals
Needed to Complete
(1) x 2S or (1) x 3S Hardcase LiPo
(1) Charger
Absima Charger Cube 2.0 - Laturi:
NiMH/LiPo Charger "CUBE 2.0" FEATURES:
A "easy-to-use" charger which is especially suitable for beginners. The uncomplicated setting options make it easy to operate and it`s suitable for LiPo/LiFe and NiMH/NiCd batteries. The unit features a selectable charging rate, delta-peak sensitive cut-off and cell balancing of LiPo/LiFe batteries.
AC power cable available with Euro pin plug (4000033)
SPECIFICATION:
Input voltage: 100-240V AC Charging current: 1.0A / 3.0A / 5.0A (50W) Charging output: 4mm sockets LED for battery type identification and status LiPo/LiFe batteries: 2-3S NiMH/NiCd: 1-8 cells Balancing current: 350mAh Delta-peak sensitive Internal power suply Dimmension: 110x109x49 mm Weight: 490 g
SCOPE OF DELIVERY:
Cube 2.0 Charger AC power cable LiPo/LiFe balancing board Charging cable with T-plug Charging cable with Tamiya plug Manual
Absima Greenhorn V2 LiPo 11.1V-50C 5000 Hardcase (EC5-Plug):
NEW GENERATION WITH 50C AND A BETTER INNER RESISTANCE GREENHORN LINEV2 -Absimas LiPo-Beginner-Serie Description:
Safety First !!!! Absima GreenHorn LiPo batteries maintain an extremely high quality standard and therefore offer perfect safety. An Absima GreenHorn LiPo battery is the perfect choice for beginners.
Features:
- Plug system: EC5-Plug
- Minimum capacity: 5000 mAh
- Voltage: 11.1 Volt
- C-rate: 50 C
- Watt hours: 55.5Wh
- Balancer plug system: XH
- Battery box design: Hardcase
- Measures (LxWxH) 138 x 46 x 35 mm
- Weight: 370 g
ValueRC LiPo Bag - Lipopussi - Latauspussi:
Sopiva LiPo pussi kaikille normaalikokoisille akuille!
LiPo pussiin mahtuu 3-4 normaalikokoista akkua.
Kätevät tarranauhat ja sopiva koko tekee käytöstä helppoa. Täällä säilytät kätevästi ja turvallisesti akut.
Mitat: 185mm x 75mm x 60mm
Miksi LiPo pussi?
LiPo akut ovat tehty Lithiumista joka väärin käytettynä palaa agressiivisesti. Lähes kaikki nykypäivän akut kuten puhelimen ja tietokoneen akut ovat tehty Lithiumista mutta RC käytössä akut ovat kovassa käytössä ja laturit ovat monesti tehokkaampia. Kunhan muistat ladata LiPo akun älylaturilla balansointi ohjelmalla niin mitään ei pitäisi tapahtua, mutta turvallisuuden vuoksi kannattaa akku ladata LiPo pussissa joka suojaa tulipalolta jos vahingossa lataat väärällä ohjelmalla ja väärin kytkettynä tai akku on vaurioitunut.
Huom. LiPo pussit saattavat vaatia että käytät akussa tasauksen jatkojohtoa jotta akun tasausjohto yltää laturiin hyvin:
Products»Electronics»Cables, adapters and connectors»
Balancingboards and extension cables
Dusty Motors Shroud Cover - ARRMA 4x4 Big rock, Typhon and Senton:
This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.
Features:
Shroud comes with a zipper
Genuine adhesive VELCRO® tape included
Hand made with a very strict quality inspection
Easy installation
MADE IN EUROPE
– Before applying VELCRO® to the chassis, cut the tape to the necessary length and width. For example, to place VELCRO® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width.
– Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process).
– Let the VELCRO® tape adhere to the chassis for 24 hours before you use the shroud.
– If it’s hot outside, leave the Dusty Motors’ shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris.
– When it’s hot outside – or if you have a car gearing set up that’s capable of reaching the speed of light – be smart when you bash. Don’t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature.
– When bashing in winter, don’t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics.
– Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can’t be breathable and 100 percent waterproof at the same time. Physics just doesn’t work that way. The splashes of water are OK, so don’t be concerned if the shroud gets a bit damp.
– Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.
– If you like the Dusty Motors shroud, recommend it to your friends. You’ll all have a great time bashing together.
