Axial 1/18 UTB18 Capra 4WD Unlimited Trail Buggy RTR

Fully equipped and ready-to-run, the Axial® UTB18 Capra™ 4WD brings the ultimate scale trail experience to a new, 1/18-scale size. It's an affordable and portable rig that's highly capable for adventuring on the trail or entering in competition.


Key Features

- Proven Capra™ tube chassis design for realistic looks and optimum clearance
- Fully ready-to-run — everything you need is included in the box
- Portal axles for maximized ground clearance
- 4-Link suspension geometry for optimal crawling capabilities
- LED headlights, light bar, and rock lights continue the realism after the sun sets


In The Box

- (1) Axial® UTB18 Capra™ 1/18 Scale Unlimited Trail Buggy 4WD RTR
- (1) Spektrum™ SLT2 2.4GHz 2-Channel Radio
- (1) Spektrum SLT 25A Brushed 2-in-1 ESC/RX
- (1) Dynamite® Tazer™ 37T Brushed Motor
- (1) Spektrum 7Kg Servo
- (1) Dynamite 7.4V 650mAh 2S 20C LiPo Battery with EC2™ Connector
- (1) Dynamite® USB Charger
- (4) AA Transmitter Batteries
- (1) Product manual


Needed to Complete

Nothing! Everything needed to drive the 1/18 Capra UTB is included in the box!


Features

- Axial® Capra™ rock crawling performance now in 1/18 scale!
- Proven Capra™ tube chassis design for realistic looks and optimum clearance
- Fully ready-to-run — everything you need is included in the box
- Portal axles for maximized ground clearance
- 4-Link suspension geometry for optimal crawling capabilities
- Stainless steel lower links and metal axles with front universals
- Axle-mounted 1/10 scale servo allows better steering control in full articulation
- LED headlights, light bar, and rock lights continue the realism after the sun sets
- Officially licensed Nitto Trail Grappler M/T tires on Raceline Monster wheels
- Realistic interior with helmeted driver and passenger figures
- High-quality electronics and Spektrum™ SLT2 radio


Unlimited Trail Buggy in a Whole New Scale!

The go-anywhere grit of Axial® rock crawling rigs is now available in a whole new scale with the UTB18 Capra™ 4WD Unlimited Trail Buggy. Its - unique, 1/18 scale size makes high-end RC crawling easily affordable — and you can take the UTB18 Capra 4WD almost anywhere for the unlimited scale trail experience even in locations with limited area for crawling. Mini competition enthusiasts will also love the highly capable design. Of course, no Axial fan's collection will be complete without this high-capability, groundbreaking rig.

Fully equipped and ready-to-run, the Axial UTB18 Capra 4WD is similar in design to the popular 1/10 scale Capra 1.9 4WD Unlimited Trail Buggy and has a scaled-down Capra tube chassis. Like the larger trail buggy, the UTB18 Capra also has portal axles. They give the UTB18 Capra extra ground clearance for maneuvering. Add in its axle-mounted, low profile 1/10 scale servo for quick, strong steering and the durable 4-link suspension system, and the UTB18 Capra is ready to prove that size has nothing to do with crawling performance.

Officially licensed Nitto Trail Grappler M/T tires mounted to officially licensed Raceline Monster wheels give the UTB18 Capra the grip to conquer rocky trails, rough dirt tracks, and most other off-road surfaces. Body panels with licensed livery, helmeted driver and passenger figures, LED lights and more combine for realistic scale looks to match its capabilities on the trails.

The Axial UTB18 Capra 4WD Unlimited Trail Buggy comes ready-to-run with high-quality electronics, a Spektrum™ SLT2 radio, LiPo battery, and Dynamite® USB charger. You'll need nothing else to get crawling except the urge for adventure!


UNIQUE 1/18 SCALE
Similar to the popular Capra™ 1.9 Unlimited Trail Buggy but in 1/18 scale, the UTB18 Capra enables anyone to afford an easily portable, highly capable crawler that delivers the ultimate scale trail experience even in locations with limited area for crawling.


CAPRA™ TUBE CHASSIS DESIGN
By reproducing the proven 1/10 scale Capra tube chassis design in 1/18 scale, Axial® gives the UTB18 Capra the same realistic trail buggy looks as well as optimum clearance over rugged terrain.


PORTAL AXLES
The UTB18 Capra™ 4WD Unlimited Trail Buggy includes portal axles that increase ground clearance at the differential and deliver the best crawling performance.


1/10 SCALE AXLE MOUNTED LOW PROFILE SERVO
Like the setups used by most competition crawlers, the UTB18 Capra™ 4WD Unlimited Trail Buggy has an axle-mounted servo design that contributes to a lower center of gravity and allows better steering control in full articulation.


ALL-METAL FRONT UNIVERSALS AND REAR AXLES
Axial® universals provide smooth action and 45 degrees of steering angle for an efficient, higher performing drivetrain. The universal is made of machined steel for durability.


4-LINK SUSPENSION
Axial® has fine-tuned the UTB18 Capra™ 4WD Unlimited Trail Buggy suspension geometry to provide the best crawling capabilities.


OFFICIALLY LICENSED TIRES AND WHEELS
Nitto Trail Grappler M/T tires on Raceline Monster black composite wheels find a secure grip on dirt, rocks, and all other off-road trails, providing realistic scale looks and serious trail performance.


REALISTIC INTERIOR
The interior inside the licensed livery body panels features helmeted driver and passenger figures plus other realistic details that add to the UTB18 Capra™ 4WD's authentic 1/18 scale crawler looks.


LED HEADLIGHTS, LIGHT BAR, AND ROCK LIGHTS
Axial® highlights the UTB18 Capra™ 4WD's 1/18 scale realism with working LED headlights, light bar, and forward facing rock lights for crawling after the sun sets.


READY TO RUN
The UTB18 Capra™ 4WD arrives fully assembled and equipped with high-quality on-board electronics plus a Spektrum™ SLT2 2.4GHz radio and Dynamite® USB Charger. Everything you'll need to start crawling is included in the box.


Specs:

Suspension / Solid Axle, Front and Rear

Charger / Included

Differential / Bevel Gear, Locked (33/13T)

Receiver / Included

Shock Type / Coil-over 2.2-3.1 in (55-78.5mm), Plastic

Wheel Width / 1.1 in (28mm)

Body / Tube Style Cage with Panels

Brakes / Integral with ESC

Pinion / 13T

Scale / 1/18

Power Type / Electric

Gear Pitch / 48-Pitch

Speed Control / Included

Wheelbase / 9" (229 mm)

Final Drive Ratio / 44.88:1

Motor Type / Brushed

Servos / Included

Rear Track / 7.7 in (195mm)

Battery / Included

Spur Gear / 40T

Steering Type / 2WS

Product Length / 12.6" (320 mm)

Internal Gear Ratio / 10.2:1

Motor Size / 380 37T

Connector Type / EC2

Ground Clearance / 1.7 in (43mm)

Inner Tire / Outer Wheel Diameter / 1.55 in

Product Width / 7.7" (196 mm)

Radio / Included

Product Weight / 29.7 oz (842g)

Tire Tread / Nitto Trail Grappler M/T

Front Track / 7.7 in (195mm)

Vehicle Type / Rock Crawler

Ball Bearings / Complete Vehicle

Completion Level / Ready-To-Run

Drivetrain / 4WD

Drive Type / Forward/Brake/Reverse

Product Height / 5.9" (150 mm)

Wheel Hex Size / 12mm