Losi 1/4 Promoto-MX Motorcycle RTR, Club MX

The Losi Promoto-MX isn't the first scale RC motorcycle that's ever been sold. But it is the very first one that accurately reproduces the full experience — and pure fun — of riding a real motorcycle. It's the long-awaited dream of RC hobbyists and dirt bike fans alike.

The unprecedented realism of the Promoto-MX goes much deeper than its faithfully detailed looks — the narrow frame, rider gear, and officially licensed graphics. Even more impressive is how successfully it captures true dirt bike performance, a breakthrough accomplished through a unique hybrid of mechanical and electronic technology developed specifically for the Promoto-MX. It's how these technologies work together that makes all the difference.

Promoto-MX electronics include a 2700Kv motor and steel flywheel that are both mounted in the center of the frame. The motor spins the flywheel at over 22,000 rpm to create a gyroscopic force for unparalleled stability. Meanwhile, patent-pending Spektrum MS6X technology takes your input from the DX3PM transmitter and commands the Promoto-MX to lean, turn, and control wheelies with unprecedented balance and finesse.

The mechanical technology is equally impressive. Losi's product development team studied full-size motorcycle suspension geometry to give the Promoto-MX the same terrain handling characteristics. A rising rate rear suspension provides superior grip and prevents bottoming out in landings. The completely innovative front fork design, with an internal spring and dampener, can be tuned by changing the silicone dampening fluid and also allows ride height adjustments. An innovative front and rear wheel braking system gives the bike impressive stopping power, cutting the stopping distance in half compared to rear brake only.

Both technologies, electronic and mechanical, are why the Promoto-MX performs better at high and low speeds than any previous RC motorcycle. For dirt bike fans, the "feel" of the Promoto-MX will be instantly familiar. RC car enthusiasts will discover a new way to drive that pulls you deep into the heart of the action — carving berms, skimming whoops, holding wheelies, and throwing roost.

Finally. An RC dirt bike that really works! Anytime and anywhere, just grab your Losi Promoto-MX, get in the zone, commit to your line, and begin to be the bike.

PATENT-PENDING SPEKTRUM MS6X TECHNOLOGY
The upgraded Spektrum DX3PM transmitter and SR6300PM receiver combine with patent-pending MS6X technology for unprecedented control. Promoto-MX drivers can maintain balance at high or low speeds and over jumps and whoops, then give simple steering inputs to carve around tight berms and straighten up heading into the next rhythm section. For more aggressive driving, use the MS6X knob to increase the lean angle.

ON THE FLY" DRIVE MODES
The DX3PM has three preprogrammed drive modes that you can toggle between "on the fly" using your thumb on the A/B rocker switch.

Dirt Mode — Allows the Promoto-MX to pitch up enough without clipping the throttle for going up jump faces and obstacles, but helps prevent "wheelie-overs" by intuitively clipping the throttle output if the bike begins to pitch up too far.
Street Mode — Senses when the Promoto-MX starts to pitch up and clips the throttle quickly, getting the front tire back on the ground to accelerate as much as possible.
Wheelie Control — Let 'em rip! Wheelie Control lets you hold wheelies on smooth surfaces all the way to top speed.
 

Power Type: Electric
Gear Pitch: 32-Pitch
Servos: Included
Tire Tread: Dunlop Geomax MX53
Vehicle Type: Motorcycle
Product Weight: 123.5oz (3500g)
Completion Level: Ready-To-Run
Drivetrain: 1WD
Product Height: 17.3" (439 mm)
Tire Compound: 65S
Battery: Sold Separately
Connector Type: IC5 / EC5
Ground Clearance: 2.9 in (73mm)
Internal Gear Ratio: 4.8:1
Motor Size: 540
Product Length: 20.2" (513 mm)
Spur Gear: 50T
Suspension: Front Fork, Rising Rate Rear Suspension
Wheel Width: Front - 1.1 in (28mm), Rear - 1.4 in (36.3mm)
Vehicle Size: Standard
Product Width: 10.8" (274 mm)
Radio: Included
Technology: AVC and SMART, MS6X
Ball Bearings: Full Ball Bearings
Chassis: 3mm Aluminum Plate
Final Drive Ratio: 12.0:1
Motor Type: Brushless
Speed Control: Included
Approximate Assembly Time: Less than 1 Hour
Body: Color Molded Panels with Wrap Graphics
Brakes: Front - Cable Driven Piston/Caliper/Rotor, Rear - Motor Braking
Pinion: 20T
Scale: 1/4
Charger: Sold Separately
Receiver: Included
Shock Type: 16mm Big Bore Aluminum Shock