SaadavusHinnanguliselt
3 - 15 päev(a) tellimusest. Hinnangu usaldusväärsus on hea.
SaadavusTeavita mind, kui toode on jälle saadaval.
Ülevaated
Toote kirjeldusThis is the Ultimate Bearing Cleaning Unit. This Bearing Cleaning Unit is intended for cleaning any RC bearing.
Cleaning instructions:
Open the unit, put the bearings inside, fill the Ultimate Bearing Cleaning Unit up about 1/3rd of the way full with your cleaning solution and close the cap tightly. Agitate the cleaning solution by gently shaking the unit. Shake for about 30 seconds or until you are satisfied that your bearings are cleaned completely.
Recommendations:
If you are going to use a solvent, we recommend to gently remove the non-contact rubber shield of the bearing. Do not clean the rubber shields with any solvent, as some
solvents can cause the rubber to blister and ruin the fit on the bearing. Gently wipe them clean using a clean cloth or use soapy water. If you choose to use soapy water, make sure to dry the shields completely before putting them back onto the bearing.
Once the bearings are clean and dry, the next step is to lubricate them. Put two drops of the lubricant per bearing and spin the bearing between your fingers to distribute the lubricant throughout the entire bearing. If you have ceramics, only one drop of lubricant is needed.
Pakitud toote või tootepakendi hinnanguline suurus on 100 x 180 x 50 mm.
Kaal0,05 kg(Sisaldab ka võimaliku pakendi kaalu)
Päritolumaa Hispaania
KommentaaridLisa kommentaar
Kaubamärk