Üldhinnang | 1 arvustus) | (
Overview:
The BLX185 150A waterproof ESC provides consistent power control
and is 6S LiPo ready.
Fitted with super-reliable XT-90 connectors and sporting a built-in
cooling fan for reduced heat during intense driving action, the
BLX185 ESC has over voltage protection, and a two-stage LiPo cut
off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined
with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide
the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - Per
battery pack
3S, 4S and 6S LiPo Compatibility
POWER TYPE: BLX Brushless Extreme Performance
ESC Type: 150AMP Continuous current capacity
Battery usage: 3S LiPo (11.1), 4S LiPo (14.8) or 6S LiPo (22.2V)
Stick Pack
Low Voltage Cut-Off (LVC): 3.2V per cell
Thermal Protection Temperature: 105°C / 221°F
Over-Voltage Protection: Over 6S LiPo (22.2V)
BEC Voltage: 6V
BEC Current: 3A
ESC Length: 57.5mm / 2.26""
ESC Height: 38.9mm / 1.53""
ESC Width: 59.5mm / 2.34"" (Including hold-down tabs)
ESC Weight: 196g / 6.91oz
Receiver Wire Length: 200mm / 7.87""
Battery Wire Length: 165mm / 6.5""
Motor Wire Length (Including Connector): 130mm / 5.12""
Switch Length: 29.3mm / 1.15""
Switch Width