ARRMA RC GRANITE 4X4 BLX 2s LiPo pakk

ARRMA RC GRANITE 223S 4X4 RTR 1/10 Brushless Monster Truck:

Product Details
Aggressively styled and ready-to-run, the 1/10 scale ARRMA GRANITE 223S BLX 4X4 monster truck dominates with 2S to 3S power and the potential for 50+ mph speeds. Increase its performance as your experience grows, without needing upgrades or a new vehicle.Key Features
2S and 3S ready, for brushless beginner to pro-level speeds
Spektrum DSC (Dynamic Stability Control) and throttle limiting keep you in control
Heavy-duty transmission and all-terrain suspension
Aggressively styled truck body with clipless body retention system
Ready-to-run - just add battery and charger
 In The Box
(1) GRANITE 223S BLX 4X4 1/10 Scale Monster Truck RTR
(1) Spektrum SLT 80A 2-in-1 Waterproof ESC & Receiver 2S/3S with DSC
(1) Spektrum 3100Kv Brushless Motor
(1) Spektrum SLT3 2.4GHz Transmitter
(1) Spektrum S662 Metal-Geared 25T Waterproof Digital Servo
(4) AA Batteries
(1) Instruction Manual
*For details on waterproof standards, please refer to the product instruction manuals
 Needed to Complete
(1) x 2S or (1) x 3S Hardcase LiPo
(1) Charger

Absima Greenhorn V2 LiPo 7.4V-50C 4000 Hardcase (EC5-Plug):

WITH EC5 Plug

NEW GENERATION WITH 50C AND A BETTER INNER RESISTANCE 
GREENHORN LINEV2 - Absimas LiPo-Beginner-Serie 
Description: Safety First !!!! Absima GreenHorn LiPo batteries maintain an extremely high quality standard and therefore offer perfect safety. An Absima GreenHorn LiPo battery is the perfect choice for beginners. 

Features: 
- Plug system: T-Plug 
- Minimum capacity: 4000 mAh 
- Voltage: 7.4 Volt 
- C-rate: 50 C 
- Watt hours: 29.6Wh 
- Balancer plug system: XH 
- Battery box design: Hardcase 
- Measures (LxWxH) 138 x 46 x 25 mm 
- Weight: 235 g

Absima Charger LC-2.0 LiPo:
The LC-2.0 is a small and easy-to-use charger for LiPo and LiHV batteries. There is also a "Storage" function to charge Li batteries to the correct storage voltage before storing them. Our Absima chargers have a variety of protective functions for safe charging.
 
Features:
 
25W charging power
Very compact and lightweight balance charger
Suitable for LiPo & LiHV 
LiPo storage charging function
LED indicator
Simple operation through "Plug'n Play"
 
Tech Specs:
 
Input voltage: 100-240V AC
Charging current 2S LiPo: 2.2A
Charging current 3S LiPo: 1.5A
Charging accuracy: <0.01V, 4.20V
Balance current: max. 200mA
LED indicator: green: stand-by/full; red: charging process
Dimensions (L/W/H): 90x65x35mm
Weight (incl. cable): 150g
 
Scope of delivery: 
 
LC-2.0 charger
Power cable
Instructions (DE/EN/FR)

ValueRC LiPo Bag - Lipopussi - Latauspussi:

Sopiva LiPo pussi kaikille normaalikokoisille akuille!

LiPo pussiin mahtuu 3-4 normaalikokoista akkua.

Kätevät tarranauhat ja sopiva koko tekee käytöstä helppoa. Täällä säilytät kätevästi ja turvallisesti akut.

Mitat: 185mm x 75mm x 60mm

Miksi LiPo pussi?

LiPo akut ovat tehty Lithiumista joka väärin käytettynä palaa agressiivisesti. Lähes kaikki nykypäivän akut kuten puhelimen ja tietokoneen akut ovat tehty Lithiumista mutta RC käytössä akut ovat kovassa käytössä ja laturit ovat monesti tehokkaampia. Kunhan muistat ladata LiPo akun älylaturilla balansointi ohjelmalla niin mitään ei pitäisi tapahtua, mutta turvallisuuden vuoksi kannattaa akku ladata LiPo pussissa joka suojaa tulipalolta jos vahingossa lataat väärällä ohjelmalla ja väärin kytkettynä tai akku on vaurioitunut.

Huom. LiPo pussit saattavat vaatia että käytät akussa tasauksen jatkojohtoa jotta akun tasausjohto yltää laturiin hyvin:

Tooted‪»Elektroonika‪»Kaablid, adapterid ja ühendusklemmid‪»

Balancingboards and extension cables

 

ValueRC Lipo Battery Balance Charging Extension Cable 20cm 2S - Lataus jatkojohto:
Kätevä balansointi jatkojohto 2s akulle. Verrattuna muihin balansointijohtoihin tämä on tehty laadukkaasta silikonijohdosta.

Tällä saat paremmin liikkumisvaraa akulle latausvaiheessa. Lähes pakollinen apu kun latailet LiPo pussin kanssa.

XH-liitin, eli yleisin malli.

Paketissa 1 kpl.

Dusty Motors Shroud Cover - Arrma 4x4 Granite/Vorteks ja Gorgon 2wd:

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.

Features:


Shroud comes with a zipper
Genuine adhesive VELCRO® tape included
Hand made with a very strict quality inspection
Easy installation
MADE IN EUROPE

– Before applying VELCRO® to the chassis, cut the tape to the necessary length and width. For example, to place VELCRO® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width.
– Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process).
– Let the VELCRO® tape adhere to the chassis for 24 hours before you use the shroud.
– If it’s hot outside, leave the Dusty Motors’ shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris.
– When it’s hot outside – or if you have a car gearing set up that’s capable of reaching the speed of light – be smart when you bash. Don’t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature.
– When bashing in winter, don’t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics.
– Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can’t be breathable and 100 percent waterproof at the same time. Physics just doesn’t work that way. The splashes of water are OK, so don’t be concerned if the shroud gets a bit damp.
– Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.
– If you like the Dusty Motors shroud, recommend it to your friends. You’ll all have a great time bashing together.

Vapex Plus Alkaline batteries AA 4pc:

Normaalit AA-paristot.

Laadukkaat, kestävät ja toimivat. Lähes jokainen RC radio toimii nykyään 4x AA paristolla.