ARRMA RC SENTON 4X4 3S BLX 3S LIPO pakk

Absima Greenhorn V2 LiPo 11.1V-50C 5000 Hardcase (EC5-Plug):
NEW GENERATION WITH 50C AND A BETTER INNER RESISTANCE GREENHORN LINEV2 -Absimas LiPo-Beginner-Serie Description:

Safety First !!!! Absima GreenHorn LiPo batteries maintain an extremely high quality standard and therefore offer perfect safety. An Absima GreenHorn LiPo battery is the perfect choice for beginners.

Features:
- Plug system: EC5-Plug
- Minimum capacity: 5000 mAh
- Voltage: 11.1 Volt
- C-rate: 50 C
- Watt hours: 55.5Wh
- Balancer plug system: XH
- Battery box design: Hardcase
- Measures (LxWxH) 138 x 46 x 35 mm
- Weight: 370 g

ARRMA RC SENTON 4X4 3S BLX Brushless 1/10th 4wd SC:

The 1/10 scale ARRMA SENTON 223S BLX is the perfect 4X4 short course truck for growing your brushless bashing skills. It’s 2S and 3S capable, letting you increase top speeds from 35+ to 50+ mph — without adding upgrades or buying another vehicle.

ARRMA 1/10 SENTON 223S RC SHORT COURSE TRUCK RTR OVERVIEW

Joining and advancing in the world of high-speed brushless short course truck bashing is easier than you might think. Just start with the 1/10 scale ARRMA SENTON 223S BLX 4X4 short course truck. With aggressive styling, ready-to-run simplicity, unmatched durability, and premium performance, it has everything you need, at a price you can afford. Plus, it's ready out of the box for 2S or 3S LiPo power!

ARRMA developed the 223S series especially for brushless bashing newcomers who want to grow from 2S to 3S capabilities without adding expensive upgrades or buying a whole new vehicle. The SENTON 223S BLX 4X4 reaches 35+ mph top speeds with a 2S LiPo, matching or beating the best that other manufacturers' 2S bashers can do. Whenever you're ready to go faster, just install a 3S battery. Now you can unleash the short course truck's full 50+ mph potential!

You control how fast your SENTON 223S BLX 4X4 can go with the battery you choose and where you set the Spektrum SLT3 transmitter's throttle limiter switch. With throttle limiting, the SLT3 automatically limits top speed to whatever level you prefer until you're ready for it all. Set the switch to 50% or 75% and you'll never have to worry about moving faster than you can safely manage. Make the transition from 2S to 3S brushless speeds with complete confidence.

The Dynamic Stability Control (DSC) built into the short course truck's Spektrum electronics offers another special advantage. With four selectable modes, DSC will automatically correct steering input as needed to improve your control, confidence, and safety, whether you're bashing on high-grip or low-grip surfaces. As you gain experience, just turn off the DSC and use the skills you've mastered.

Everyone can get in on brushless short course bashing fun with the SENTON 223S BLX 4X4. Like all ARRMA vehicles, it's fast and tough — providing new and experienced brushless drivers with amped-up performance straight out of the box. Tough metal and composite materials are used for an easy-to-maintain, super-durable design. The heavy-duty 4X4 drivetrain holds up to extreme bashing, while the all-terrain suspension package and adjustable, oil-filled shocks soak up bumps.

The closed-wheel design of the short course body lets you aim for the block pass in a race without worrying about getting tangled in your competitor's tires. Impact-absorbing composite front and rear bumpers and strong composite nerf bars add more protection, while higher, extended chassis side guards keep out dirt and debris. The high-quality, on-board Spektrum electronics are waterproof, so whatever the conditions, you can bash without fear.

Take your bashing skills to the next level with the 1/10 scale ARRMA SENTON 223S BLX 4X4 short course truck. Just add your choice of battery and charger. Then discover why it's better to be brushless!

Key Features

• 2S and 3S ready, for brushless beginner to pro-level speeds
• Spektrum DSC (Dynamic Stability Control) and throttle limiting keep you in control
• Super-tough 4X4 drivetrain with center differential
• All-terrain suspension package
• Ready-to-run — just add battery and charger

In the box

(1) SENTON 223S BLX 4X4 1/10 Scale Short Course Truck RTR
(1) Spektrum SLT 80A 2-in-1 Waterproof ESC & Receiver 2S/3S with DSC
(1) Spektrum 3100Kv Brushless Motor
(1) Spektrum SLT3 2.4GHz Transmitter
(1) Spektrum S662 Metal-Geared 25T Waterproof Digital Servo
(4) AA Batteries
(1) Instruction Manual
2.5 and 3.0mm hex wrenches
*For details on waterproof standards, please refer to the product instruction manuals

Needed to complete

(1) x 2S or (1) x 3S Hardcase LiPo
(1) Charger
(1) Charging Bag

Absima Charger Cube 2.0 - Laturi:
NiMH/LiPo Charger "CUBE 2.0" FEATURES:

A "easy-to-use" charger which is especially suitable for beginners. The uncomplicated setting options make it easy to operate and it`s suitable for LiPo/LiFe and NiMH/NiCd batteries. The unit features a selectable charging rate, delta-peak sensitive cut-off and cell balancing of LiPo/LiFe batteries.

AC power cable available with Euro pin plug (4000033) 

SPECIFICATION:

Input voltage: 100-240V AC Charging current: 1.0A / 3.0A / 5.0A (50W) Charging output: 4mm sockets LED for battery type identification and status LiPo/LiFe batteries: 2-3S NiMH/NiCd: 1-8 cells Balancing current: 350mAh Delta-peak sensitive Internal power suply Dimmension: 110x109x49 mm Weight: 490 g

SCOPE OF DELIVERY:

Cube 2.0 Charger AC power cable LiPo/LiFe balancing board Charging cable with T-plug Charging cable with Tamiya plug Manual

ValueRC EC5 to T-plug Female:
EC5 - Deans Adapteri. Käytetään esimerkiksi kun akussa on EC5 liitin mutta laturissa Deans (T) liitin.

Sopii esimerkiksi kun haluat ARRMA BLX autoihin latausjohdon ja sinulla on kätyössä laturin mukana tuleva Deans johto.

ValueRC LiPo Bag - Lipopussi - Latauspussi:

Sopiva LiPo pussi kaikille normaalikokoisille akuille!

LiPo pussiin mahtuu 3-4 normaalikokoista akkua.

Kätevät tarranauhat ja sopiva koko tekee käytöstä helppoa. Täällä säilytät kätevästi ja turvallisesti akut.

Mitat: 185mm x 75mm x 60mm

Miksi LiPo pussi?

LiPo akut ovat tehty Lithiumista joka väärin käytettynä palaa agressiivisesti. Lähes kaikki nykypäivän akut kuten puhelimen ja tietokoneen akut ovat tehty Lithiumista mutta RC käytössä akut ovat kovassa käytössä ja laturit ovat monesti tehokkaampia. Kunhan muistat ladata LiPo akun älylaturilla balansointi ohjelmalla niin mitään ei pitäisi tapahtua, mutta turvallisuuden vuoksi kannattaa akku ladata LiPo pussissa joka suojaa tulipalolta jos vahingossa lataat väärällä ohjelmalla ja väärin kytkettynä tai akku on vaurioitunut.

Huom. LiPo pussit saattavat vaatia että käytät akussa tasauksen jatkojohtoa jotta akun tasausjohto yltää laturiin hyvin:

Tooted‪»Elektroonika‪»Kaablid, adapterid ja ühendusklemmid‪»

Balancingboards and extension cables

 

ValueRC Lipo Battery Balance Charging Extension Wire Cable 20cm 3S 22AWG:
Kätevä balansointi jatkojohto 3s akulle.

Tällä saat paremmin liikkumisvaraa akulle latausvaiheessa. Lähes pakollinen apu kun latailet LiPo pussin kanssa.

XH-liitin, eli yleisin malli.

Paketissa 1 kpl.

Dusty Motors Shroud Cover - ARRMA 4x4 Big rock, Typhon ja Senton:

This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.

Features:


Shroud comes with a zipper
Genuine adhesive VELCRO® tape included
Hand made with a very strict quality inspection
Easy installation
MADE IN EUROPE

– Before applying VELCRO® to the chassis, cut the tape to the necessary length and width. For example, to place VELCRO® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width.
– Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process).
– Let the VELCRO® tape adhere to the chassis for 24 hours before you use the shroud.
– If it’s hot outside, leave the Dusty Motors’ shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris.
– When it’s hot outside – or if you have a car gearing set up that’s capable of reaching the speed of light – be smart when you bash. Don’t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature.
– When bashing in winter, don’t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics.
– Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can’t be breathable and 100 percent waterproof at the same time. Physics just doesn’t work that way. The splashes of water are OK, so don’t be concerned if the shroud gets a bit damp.
– Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.
– If you like the Dusty Motors shroud, recommend it to your friends. You’ll all have a great time bashing together.

Vapex Plus Alkaline batteries AA 4pc:

Normaalit AA-paristot.

Laadukkaat, kestävät ja toimivat. Lähes jokainen RC radio toimii nykyään 4x AA paristolla.