SaadavusHinnanguliselt
3 - 30 päev(a) tellimusest. Hinnangu usaldusväärsus on hea.
SaadavusTeavita mind, kui toode on jälle saadaval.
Ülevaated
Toote kirjeldusMORE POWER, MORE FEATURES, MORE FUN !
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings.
HIGHLIGHTS:
One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)
Programmable via jumper and separately available programming card (Item 2110061)
2S LiPo operation recommended
Motor ready soldered - plug-n-play
Programmable features (via programming card):
Initial Start Force: 5%* / 13% / 21% / 29%
Low V cut-off: 3.1V* / 3.4V / Off
Crawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%
Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%
Max Reverse Force: 50%* / 75% / 100%
Start Mode (Punch): Medium* / Strong / Soft
Standard Features ESC:
Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).
Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.
Low internal resistance and excellent heat dissipation.
Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.
Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)
Specification ESC:
Continuous/short-term load: 80A/320A
Resistance: 0.0014ohm
Suitable motor types: Brushed standard motors
Battery recommendation: 2S LiPo / 6 cells NiMH
BEC 6.0V/5A
Motor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM
Measure: 41.5*35*29.5mm
Plug system: T-plug
Weight: 63.4g
Specification B-Spec Motor:
Turns: 12T
Speed: 32.000RPM
Output power: 165W
Operating voltage: 7.2-7.4V
Technical Size: 540
Motor shaft: Length 12,3mm; Ø 3,18mm
Motor size: Length 53,2mm; Ø 35,7mm
Ball bearings: 2
Weight: 165g
Lieferumfang:
1:10 Brushed V2 Speed Controller
Thrust B-Spec Brushed Motor
Adhesive Tape
Manual
Toodet on võimalik saata ümbrikus. Seda toodet mahub ümbrikusse 20 tk.
Pakitud toote või tootepakendi hinnanguline suurus on 100 x 100 x 10 mm.
Kaal0,1 kg(Sisaldab ka võimaliku pakendi kaalu)
Päritolumaa Hiina
KommentaaridLisa kommentaar
Kaubamärk