TillgångUngefär
3 - 30 dag(ar) från beställningen. Tillförlitlighet vid uppskattningen är bra.
LagersituationenMeddela mig när produkten kommer in i lager igen
Omdömen
ProduktbeskrivningThe CR3.4 SHERPA PRO is the best we can offer! In addition to the outstanding features offered by the CR3.4 chassis, we now add the ever-popular Quicrun 1080 WP speed controller from HOBBYWING. Working in conjunction with a 755 brushed motor, the programmable controller really gets the absolute most out of the car.
MORE HIGHLIGHTS:
HOBBYWING Quicrun 1080 WP speed controller with programming box - 15 programmable features in cooperation with the 2-speed gearbox and independently lockable differentials! This configuration leaves absolutely nothing to be desired!
755 motor for even more power! 15x5T and 8800 rpm
20kg metal gear servo!
Steel driveshafts - more weight and almost indestructible!
Complete gear set made of steel - made for eternity!
The paint in metallic red and the cockpit with driver figure included - So the PRO is also an optical highlight!
The drive concept - powered by HOBBYWING - includes the ever-popular QuicRun1080 WP speed controller and a 755 motor for rich torque. The built-in BEC is adjustable in voltage, 6V or 7.4 V and with 6A peak load also sufficiently dimensioned for strong servos. With the included LED programming card, a simple setting is done quickly even on the road. With the customizable parameters, there are over 80 setting options, you soon found his optimal setup for the vehicle.
CAR SPECS:
Length: 542mm
Width: 250mm
Height: 240mm
Ground clearance: 53mm
Wheelbase: 313mm
Weight: 2970g
Approach angle: 60°
Descent angle: 45°
Steering angle max: 45.8°
Rims: 12mm Hex Beadlock 1.9" 32x69mm
Wheels: 43x120mm
Shock absorber length: 90mm
Viscosity shock absorber oil: 500cps
Gear ratio: 2-speed (Hi 1/15.1 / Lo 1/37.1), remote controlled
Transmission: module 0.8/32dp - pinion 16Z / main gear 44T
Drive system: 4WD
ELECTRONICS SPECS:
ESC: Hobbywing QuicRun 80A brushed/waterproof with XT60 connector (BEC 6V@3A, 7.2V NiMh & 2S LiPo batteries can be used).
Motor: 755 high-torque brushed motor 15x5T / 8,800 rpm
Steering servo: 20kg metal gear, digital and waterproof
Mini servos: 0.9kg, waterproof
Radio system: 6-channel 2.4GHz remote control (4.8 - 12.0V LiPo capable)
INCLUDED IN DELIVERY:
Absima CR3.4 SHERPA PRO RTR Model
6-channel 2.4GHz remote control system
Decal sheet
Instruction manual (DE/EN/FR)
REQUIRED ACCESSORIES:
The CR3.4 Sherpa allows you to use a variety of LiPo batteries and NiMH batteries
Different chargers - depending on the selected battery type are available
4x AA AA cells are needed for the remote control
For wheel mounting a 7.0mm wheel nut wrench (wheels are not mounted when shipped)
Storleken på den packade produkten eller förpackningen är ca 260 x 230 x 700 mm.
Batterityp och laddareUtan batteri och laddareDrivsätt4WDKörunderlagCrawlerStorlek1/10
Vikt5 kg(Inkluderar vikten av den eventuella försäljningsförpackningen)
Tillverkningsland Kina
KommentarerLägg till en kommentar
Varumärke