Tuotteet‪» Varaosat ja tarvikkeet‪» Traxxas‪» 4x4 Slash, Stampede, Rustler, Rally & Telluride‪»

RPM Traxxas Slash 4x4, Stampede 4x4 & Rustler 4x4 Rear Carriers RPM80732

RPM Traxxas Slash 4x4, Stampede 4x4 & Rustler 4x4 Rear Carriers RPM80732


Hinta
13,60 + toimituskulut
Sis. alv 24 %


Määrä
kpl



Varastossa
Myymälä Vaasa2 kpl heti, vain nouto
Myymälä Vantaa0 kpl
Netistä toimitettavissa0 kpl

Tilauskoodi
RPM80732
Viivakoodi
672415807323
Saatavuus
Arviolta 3 - 15 vrk tilauksesta. Jos tuote on loppu toimittajalta toimitusaika voi olla pidempi. Tarkemman toimitusajan voit varmistaa asiakaspalvelustamme. Normaalisti arvion luotettavuus on hyvä.

Varastotilanne ja saapuvat
Haluan ilmoituksen, kun tuotetta tulee lisää varastoon

Sijainti Myymälä Vaasa: myymälä, Kerhopakki


Tuotteen kuvaus
Rear Bearing Carriers for the Traxxas Slash 4×4, Rustler 4x4, Nitro Rust., Nitro Sport, & Nitro Stamp.
Description
Let’s face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is equipped with RPM performance parts! Our newest muscle-laden product is a rear bearing carrier for the Slash 4×4, Telluride, Nitro Slash, Stampede 4×4 & Rustler 4×4. The stock version simply can’t handle hardcore carnage like RPM products can. Our version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier’s arm. Additionally, the bearing bores in our bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! We also reduced the end-play of the axles by approximately 1/64”, keeping your rear end tracking perfectly like it’s supposed to.

Obviously they wouldn’t be perfect without our trademark blend of RPM nylons that make our products so indestructible.

While we designed these bearing carriers with the Traxxas Slash 4×4 in mind, they are direct replacement parts for all of the following vehicles as well: Stampede 4×4, Rustler 4×4, Telluride, Nitro Rustler, Nitro Stampede, Nitro Sport, Rad 2, Hawk 2, Eagle & Blue Eagle LSII!

If you’re tired of ending a fun day due to breakage, we’re here to solve that problem. Check us out; you’ll be glad you did!

Tech Notes: RPM Rear Bearing Carriers replace Traxxas stock #1952 & #1952X. RPM Rear Bearing Carriers are sold without bearings.

Fit:

Slash 4×4
Telluride
Nitro Slash

Stampede 4×4
Rustler 4×4

Tuote voidaan toimittaa kirjeessä. Tätä tuotetta mahtuu kirjeeseen 23 kpl.

Tuotteen koko pakattuna tai myyntipakkauksen koko on arviolta 120 x 80 x 10 mm.


Paino
0,012 kg(Sisältää mahdollisen myyntipakkauksen painon)


Valmistusmaa
Yhdysvallat


Kommentit
Lisää kommentti

Tuotemerkki

RPM
RPM
67 tuotetta

Tuotteet, joita on ostettu usein tämän tuotteen kanssa: