SaatavuusArviolta
3 - 15 vrk tilauksesta. Jos tuote on loppu toimittajalta toimitusaika voi olla pidempi. Tarkemman toimitusajan voit varmistaa asiakaspalvelustamme. Normaalisti arvion luotettavuus on hyvä.
Varastotilanne ja saapuvatHaluan ilmoituksen, kun tuotetta tulee lisää varastoon
Tuotteen kuvausKyosho OPTIMA 1:10 4WD KIT *LEGENDARY SERIES* varaosa RC-autoon.
Onko sinulla kysyttävää tästä RC-osasta? Kysy lisätietoja ja tarkempi sopivuus asiakaspalvelustamme
Speed has form. The winning formula is …
The first OPTIMA model was heralded as a technical masterpiece at
its release in 1985 and from then, Kyosho has set the standard in
R/C development. Memories of the OPTIMA are fresh even after 30
years and its stylish form and ruthlessly efficient performance
still resonate amongst modern racing machines. Now the new OPTIMA
is ready to continue the battle for racing dominance, embodying the
latest in technological evolution but with the distinctive OPTIMA
style. The narrow backbone shaped chassis provides the platform for
optimal geometry with large steering angles and double wishbone
suspension with long 35mm suspension stroke. Recreated in the image
of the original design, the the 4WD chain system is housed inside a
sealed compartment and the gears and gearbox at the center of the
drive train are equipped with robust metal counter gear pinion and
rear diff case. The drive train also features a slipper clutch and
precision 48-pitch gear modules that reduce drive loss and fulfill
the potential of modern power sources. Modern features include the
choice of chain drive or belt drive as well as big bore shocks on
front and rear that have been recreated in the original OPTIMA
colors, plus hex screws. As a true racing partner, the OPTIMA is
ready to race again with the latest advancements in driving
performance.
Technical data
Length : 395mm
Width : 240mm
Height : 120mm
Ride height : 36mm
Wheelbase : 260mm
Tread (F/R) : 204mm /204mm
Tire(F/R) : Φ86×40mm / Φ86×40mm
Gear Ratio : 9.24:1
Weight : 1600g
Motor : 540 class size
Required for Operation2-channel R/C system (servo x 1, ESC x 1)
540 Size Motor
7.2V NiMH battery or 7.4V Li-PO battery
Charger for motor battery (For DC: Regulated 12V power supply)
Tools for body painting
Batteries for transmitter
Tools (phillips head screw driver large, small. Needle Nose Pliers,
Scissors, Sharp Hobby Knife)
Kit Contents
Semi Pre-assembled kit (gearbox and oil shocks are
pre-assembled)
Clear polycarbonate body
Decals
L-shape hex wrench
Cross wrench
Shock wrench
Shock oil
Grease
Threadlock glue
AjoalustaOff-road(maasto)Kokoluokka1/10Vetotapa4WD
Valmistusmaa Japani
KommentitLisää kommentti
Tuotemerkki