Huippuhauska pikku crawleri sisä ja ulkokäyttöön! Tämä pikku
crawleri etenee yllättävän hienosta maastossa ja tarjoaa hauskoja
harrastushetkiä. Vauhti on autossa hyvin maltillinen joten sopii
myös perheen pienemmille. Paketissa tulee mukana kaikki mitä
ajamiseen tarvii, auto, ohjain, akku ja USB laturi.
This tiny super fun crawler gives you fun for a long time! Altough
this car is pretty small, it has an unbelivable ability to climb
and move in the most difficult spots. As the speed is pretty low
this car is also perfect for the younger people. The package
includes everything you need for driving!
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24
scale. At less than 8" long, it's the perfect rig to take along on
your hiking, camping, and other outdoor and indoor adventures —
offering factory-assembled ease, scale looks, and confident
handling on any trail.
Even new modelers driving the SCX24 chassis will be well-equipped
to tackle tough climbs and rough trails. Like the larger SCX10™ II
chassis, this smaller version uses plenty of steel components —
from the C-channel frame rails to the front and rear axles and
dogbones. Even over off-road, mountainous, rocky and desert
terrain, it has the strength to keep pushing onward and upward.
For the most reliable handling, the SCX24 chassis features a
three-link front and four-link rear suspension. The combination of
coil-over shocks and durable plastic suspension links delivers
Axial-worthy crawling performance even at this small scale. The
worm gear drive setup permits a high ground clearance plus a low
gear ratio that reduces torque twist.
Powered by an included 180-size motor and LiPo battery, the SCX24
Deadbolt shows off competence and charisma on the trails. Check out
that Deadbolt body — with its narrow stance, bulging hood,
realistic driver figure, and molded roll cage with realistic light
bar. The realism continues right down to the ground, where you'll
find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail
Grappler tires.
Adding even more to its beginner appeal, the SCX24 Deadbolt comes
100% complete and ready to run. Everything required for action is
in the box: assembled and finished vehicle; Axial 3-channel 2.4GHz
radio system with servo and ESC/receiver unit; Dynamite® 88T
brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo
charger; and even four AA cells for the transmitter!
Features
Includes 3 channel radio system, ESC and transmitter batteries
Includes motor and on-board LiPo battery
Realistic narrow-stance rock crawler body in olive green or red
Molded roll cage with realistic light bar
Realistic driver figure and many other scale details
Officially licensed KMC XD229 Machete Crawl wheels
Officially licensed Nitto Trail Grappler M/T tires (S30 compound,
large block tread)
Full-time 4WD
Splined and sleeved front and rear drive shafts allow for maximum
suspension travel while keeping the power to the wheels
Steel front and rear axles, front stub axles and dogbones provide
strength and durability
Rugged steel C-channel frame rails with bracing keep everything
rigid and aligned
Front and rear axles consist of a two-piece, molded plastic solid
axle design
3-Link front and 4-link rear suspension supply optimal handling
Coil-over shocks with simulated reservoir and durable plastic
suspension links deliver proven Axial crawling performance
Front and rear differentials each house a worm gear setup to power
the axles and create higher ground clearance. Worm gear drive also
provides a low gear ratio to reduce torque twist
Two LEDs in the front bumper for night driving
What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
(1) Axial AE-6 ESC/receiver combo (installed)
(1) Dynamite® 88T brushed electric motor (installed)
(1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 3-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual
Needed to complete:
Nothing