Hobbywing Xerun XR8 Pro G3 Combo with 4268SD 1900kV G3 Motor Off-Road

Product information "Hobbywing Xerun XR8 Pro G3 Combo with 4268SD 1900kV G3 Motor Off-Road"
This powerful Xerun combo is specifically designed for 1/8 scale off-road cars and includes the latest generation XR8 Pro ESC. This G3 ESC is 15% smaller, more powerful and with an even lower temperature generation compared to its predecessor. There is also an adjustable BEC that allows the use of a wide variety of servos of Your choice. Fittingly, a 4268 SD G3 motor pairs up with it, which with its 1900kV, like the ESC, is a lot more powerful and efficient than its predecessor. In combination with each other, the result is a 100% sensor-controlled drive system and thanks to the Hall sensor system, this combo results in an overall clean and stable sensor mode run.

Features:

Over 30 different parameters available
3 preset profiles for 1/8 Racing (e.g. Zero Timing/Blinky Mode, 1/8 Off-Road Racing, 1/8 On-Road Racing) included
Super BEC with max. 12A and 6V or 7.4V for using a wide variety of servos
Easy programming with the OTA programming module, the LCD programming box or a smartphone
Low heat development
Low cogging torque
High-quality materials and excellent workmanship
Easy construction
Technical Specifications:

ESC
Type: Brushless Sensored
Current (cont/peak): 200A/1080A
Cells: 2S-4S LiPo
BEC: 6V/7.4V @ 6A (Switch Mode)
Waterproof: No
Programming:
- LCD Programm Box G2
- OTA Bluetooth Programmer
- Independent programming port
Dimensions: 54.8x36.8x38.8mm
Weight: 102.8g
Application:
1/8 Off-Road, On-Road, Racing,
1/10 Short Course, Monster Truck
Motor Scale: 1/8
Type: Brushless Sensored
kV Rating: 1900kV
No-Load Current: 4A
Cells: 2-6S
Poles: 4
Diameter: 42mm
Length: 67.8mm
Shaft Diameter: 5mm
Weight: 315g
Timing: 20-40 degree (adjustable)

Delivery:

1x Xerun XR8 Pro G3 ESC
1x Xerun 4268SD G3 Motor with 1900kV
1x Manual

Product information "Hobbywing Xerun XR8 Pro G3 Combo with 4268SD 1900kV G3 Motor Off-Road"
This powerful Xerun combo is specifically designed for 1/8 scale off-road cars and includes the latest generation XR8 Pro ESC. This G3 ESC is 15% smaller, more powerful and with an even lower temperature generation compared to its predecessor. There is also an adjustable BEC that allows the use of a wide variety of servos of Your choice. Fittingly, a 4268 SD G3 motor pairs up with it, which with its 1900kV, like the ESC, is a lot more powerful and efficient than its predecessor. In combination with each other, the result is a 100% sensor-controlled drive system and thanks to the Hall sensor system, this combo results in an overall clean and stable sensor mode run.

Features:

Over 30 different parameters available
3 preset profiles for 1/8 Racing (e.g. Zero Timing/Blinky Mode, 1/8 Off-Road Racing, 1/8 On-Road Racing) included
Super BEC with max. 12A and 6V or 7.4V for using a wide variety of servos
Easy programming with the OTA programming module, the LCD programming box or a smartphone
Low heat development
Low cogging torque
High-quality materials and excellent workmanship
Easy construction
Technical Specifications:

ESC
Type: Brushless Sensored
Current (cont/peak): 200A/1080A
Cells: 2S-4S LiPo
BEC: 6V/7.4V @ 6A (Switch Mode)
Waterproof: No
Programming:
- LCD Programm Box G2
- OTA Bluetooth Programmer
- Independent programming port
Dimensions: 54.8x36.8x38.8mm
Weight: 102.8g
Application:
1/8 Off-Road, On-Road, Racing,
1/10 Short Course, Monster Truck
Motor Scale: 1/8
Type: Brushless Sensored
kV Rating: 1900kV
No-Load Current: 4A
Cells: 2-6S
Poles: 4
Diameter: 42mm
Length: 67.8mm
Shaft Diameter: 5mm
Weight: 315g
Timing: 20-40 degree (adjustable)

Delivery:

1x Xerun XR8 Pro G3 ESC
1x Xerun 4268SD G3 Motor with 1900kV
1x Manual