ARRMA RC KRATON 4X4 BLX 4S:
Uusi ARRMA Kraton 4x4 BLX 4s on täällä!
4x4 sarjan hurjin versio, ARRMA Outcast ja Kraton 4s versiot ovat mahtavat nelivetoiset monsterit. Huippusuosittu 4x4 sarja on osoittautunut luotettavaksi alustaksi ja ARRMA on parantanut auton kestävyyttä ja suorituskykyä.
Voimansiirto on 4x4 autossa huippuvahva. 4s versiossa spurri on metallinen ja voimansiirtoa on vahvistettu. Isot ja vahvat rattaat ja luotettava perusrakenne takaa hyvän kestävyyden.
Uusi keulintatuki ja puskuri takaa kestävyyttä, hallittavuutta ja komeaa ulkonäköä.
Kestävyyttä on paraneltu vahvemmilla osille kuten vahva metallinen runkotuki ja vahvemmat ohjauspalat ja hubit. Uudet vahvemmat osat takaa kestävyyttä ja suorituskykyä. 17mm Hexit tarjoaa parhaan kestävyyden ja säädettävät linkit tarjoaa säätömahdollisuuksia ja kestävyyttä.
Uudet sähköt ovat 4s yhteensopivat ja todella tehokkaat. Auto toimii 4s tai 3s akulla, tai 2x2s yhdistelmällä ja nämä sähköt takaavat autolle hurjaa tehoa ja helppoa löytää sopivat akut. Servo on metallirattainen 15kg vääntävä.
Ohjain on Spektrum STX2 joka tarjoaa huoletonta suorituskykyä. Ohjaimessa löytyy tarvittavat säädöt ja todella hyvänä ominaisuuksena on tehojen rajoitus jonka pystyy tekemään portaattomasti sekä myös rajoittamaan 100%/75%/50% joka on loistava ominaisuus jos olet uusi harrastaja. Servo on metallirattainen 15kg vääntävä.
Minokawa renkaat tarjoavat hyvää suorituskykyä ja kestävyyttä. Kestävät ja pitävät Minokawa renkaissa on agressiivinen kuvio ja sopiva seos.
Tekniset tiedot:
ARA102690 KRATON 4X4 4S BLX (RED)
SCALE: 1/10
MAX SPEED POSSIBLE: 50+mph / 80+km/h
BUILD STATUS: RTR
BUILD CONFIGURATION OPTIONS: Mid Motor
DRIVE TYPE: 4WD
VEHICLE TYPE: Monster Truck
SURFACE: Off-road
LENGTH: 528mm
WHEELBASE: 327mm
RIDE HEIGHT: 58mm
FRONT WIDTH: 395mm
REAR WIDTH: 402mm
HEIGHT: 192mm
NUMBER OF DIFFERENTIALS: 2
WEIGHT (NO BATTERY): 3.63kg / 8lbs 4oz
BATTERY MAX DIMENSIONS: 156x51x48mm
WARRANTY LEVEL: 2 Year Limited
Ultimate Racing PRO-8X BATTERY CHARGER:
Ultimate Racing peruslaturi jopa 6s LiPo akkujen lataukseen. 80W latausteholla saat akut nopeasti täyteen.
Ultimate Racing basic charger for up to 6s LiPo batteries. 80W chargepower to make charging quicker.
- Dual power built-in AC adapter 230V and 12V.
- Internal independent lithium battery balancer.
- Individual cell balanced discharging.
- Adaptable for various type of lithium battery.
- Fast charge and storage model for various type of battery.
- Maximum safety.
- Automatic charging current limit.
- Input power monitoring.
- Capacity limit.
- Temperature monitoring with programmable switch-off.
- Temperature threshold.
- Processing time limit.
- Data store / load.
- Supports lithium, NiMh, NiCd and lead battery packs.
Technical data:
Operating voltage range DC 11.0-18.0V.
AC IN-240V 50/60Hz.
AC to DC adaptor (DC 11.0-18.0V 5A)
Battery types / cells 1 - 15 NiCd, NiMH 1 - 6 Li-lon, LiPo
Charging current max: 80W, 0.1~10.0A
Discharge current max: 10W, 0.1~2.0A
Balance current: 460mAh / cell
Pb battery voltage: 2v-20V
Dimensions: 180 x 145 x 57 mm
Weight: 590g (Net Weight)
Box contents:
- Charger
- Charging lead: T-DEAN
- Input leads (xt60 and EU-plug)
- Instructions
:
ValueRC EC3 female to EC5 male adapter:
EC3 - EC5 adapteri. Oikea adapteri jos sinulla on akussa EC5 liitin ja autossa/laturissa EC3 liitin
Laadukaat liittimet sekä kunnollista silikonijohtoa välissä.
ValueRC LiPo Bag - Lipopussi - Latauspussi:
Sopiva LiPo pussi kaikille normaalikokoisille akuille!
LiPo pussiin mahtuu 3-4 normaalikokoista akkua.
Kätevät tarranauhat ja sopiva koko tekee käytöstä helppoa. Täällä säilytät kätevästi ja turvallisesti akut.
Mitat: 185mm x 75mm x 60mm
Miksi LiPo pussi?
LiPo akut ovat tehty Lithiumista joka väärin käytettynä palaa agressiivisesti. Lähes kaikki nykypäivän akut kuten puhelimen ja tietokoneen akut ovat tehty Lithiumista mutta RC käytössä akut ovat kovassa käytössä ja laturit ovat monesti tehokkaampia. Kunhan muistat ladata LiPo akun älylaturilla balansointi ohjelmalla niin mitään ei pitäisi tapahtua, mutta turvallisuuden vuoksi kannattaa akku ladata LiPo pussissa joka suojaa tulipalolta jos vahingossa lataat väärällä ohjelmalla ja väärin kytkettynä tai akku on vaurioitunut.
Huom. LiPo pussit saattavat vaatia että käytät akussa tasauksen jatkojohtoa jotta akun tasausjohto yltää laturiin hyvin:
Tuotteet»Elektroniikka»Johdot, adapterit ja liittimet»
Tasauslaudat ja balansointi jatkojohdot
ValueRC EC5 Loop:
EC5 Loop käytetään ARRMA:n 4s ja 6s autoissa jos haluat ajaa yhdellä akulla
Dusty Motors Shroud Cover - Arrma 4x4 Granite/Vorteks:
ARRMA Granite 4x4 / Stampede 4x4 ja Rustler 4x4 suojahuppu. Suojaa vedeltä ja pölyltä mutta päästää ilmaa läpi jotta jäähdytys ei kärsisi liikaa. Ehdoton lisävaruste talvella tai jos ajat kivisessä tai pölysessä maastossa. Parantaa auton kestävyyttä kun pienet kivet ja muut eivät pääse voimansiirtoon ja moottoriin sekä helpottaa auton pesua ja pitää auton paremmassa kunnossa.
This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool.
Features:
Shroud comes with a zipper
Genuine adhesive VELCRO® tape included
Hand made with a very strict quality inspection
Easy installation
MADE IN EUROPE
– Before applying VELCRO® to the chassis, cut the tape to the necessary length and width. For example, to place VELCRO® tape on an old Slash 4×4 nerf bars, you must cut it in both directions: length and width.
– Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process).
– Let the VELCRO® tape adhere to the chassis for 24 hours before you use the shroud.
– If it’s hot outside, leave the Dusty Motors’ shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris.
– When it’s hot outside – or if you have a car gearing set up that’s capable of reaching the speed of light – be smart when you bash. Don’t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature.
– When bashing in winter, don’t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics.
– Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can’t be breathable and 100 percent waterproof at the same time. Physics just doesn’t work that way. The splashes of water are OK, so don’t be concerned if the shroud gets a bit damp.
– Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.
– If you like the Dusty Motors shroud, recommend it to your friends. You’ll all have a great time bashing together.