Absima 1/8 Buggy STOKE Gen2.1 6S RTR

Absiman 1/8 Harjaton neliveto RTR Buggy.

Tässä autossa ei tule mukana akkua eikä laturia, mutta on muuten suoraan paketista ajovalmis.

CHASSIS CONCEPT: 
The chassis is fully tuneable with adjustable ride height, tunable shocks, adjustable camber, adjustable toe angle, multiple shock mounting positions and adjustable rear wing. 
Durable aluminum parts like the 3mm laser-engraved chassis plate, golden colored wheel hubs wishbone brackets, brace- and damper parts, ensure a long chassis life and a premium design. 

DRIVE CONCEPT: 
The drive concept - powered by HOBBYWING is top in it´s class for performance and reliability and accelerate the vehicle up to 110 km/h. The cooling fan on the 150A speed controller keeps temperatures consistent during full throttle 6S action. The 2100KV motor delivers insane power to the wheels. 
The recommendations for the optional high-speed reduction (pinion is included in the scope of delivery) apply to operation on hard, level surfaces. Do not use for off-road, bashing or continuous start/stop riding, as this may damage the drive units (controller/motor)! 
Parameters like brake force, drag brake, start mode (punch), running mode and LiPo cut-off you could change the settings through a set button or a programming box (separately available). XT90 connectors provide a reliable connection between your speedo and your choosen battery packs. So much power want to be supplied! We advise to quality batteries with high capacity and a C-rate of at least 60C. 

CVD shafts front and rear, CNC machined spur- and metal differential gears and center dogbones are used for power transmission. 
"Easy-Use" motor mount concept for a quick and easy motor removal. Just open 2 screws and slide it out! 
A high-speed pinion gear is included for high speed running on hard, flat surfaces. For off-road or high-load repetitive start-stop driving we recommend the standard pinion which is installed as standard! 
STEERING CONCEPT: 
Our proven ABSIMA "CR2SV2" 2.4 GHz radio system guarantees a fast and reliable connection to your vehicle. The 9kg metal gear servo with aluminum horn and durable high-performance tires ensure proper steering on any surface. 

Get your ABSIMA Stoke 6S Buggy and experience a whole new level of quality and performance! 

Extremly durable composite plastic parts 
Fully adjustable chassis concept 
CNC machined spur gear and metal motor pinion 
Adjustable oil-filled 16mm "Aluminum Big Bore" shocks 
3 full-metal geared differentials 
Downforce wing 
Adjustable wing holder 
2-piece sliding motor mount concept for easy adjustment and instalation 
Massive CVD axles - front & rear 
Middle steel drive shafts - front & rear 
Race compound low profile tires 
"Saddle-Pack" battery concept for a perfect weight distribution 
3mm black aluminum chassis plate with ABSIMA laser engravings 
Aluminum servo arm 
Seperate water- and dust-proof receiver box 
Completely ball bearing mounted 
Chassis sideguards for dirt protection 
All aluminum parts anodized in gold 
Aluminum 17mm wheel hex drives 
Steel turnbuckles all-over 
Adjustable camber, toe angle & ride height 
SPEED UP TO 110 KM/H 





ABSIMA "CR2SV2" 2.4GHz A.F.H.D.S. radio system (servo reverse and dual rate function; foam steering wheel) 
Water-proof 150A HOBBYWING speed controller (BEC: 6V/4A; programmable features: LiPo cut-off, runing mode, brake force, drag brake, punch) 
Powerfull 2100KV 4-pole sensorless brushless motor (600W, Shaft Ø: 5mm, Module 1) 
9kg / metal gear steering servo (25T outdrive) with aluminum servo arm 

Scale: 1:8 
Drive type: 4WD 
Surface: Off-road 
Wheelbase: 345mm 
Chassis clearance: 35mm 
Tire width: 43mm 
Tire Ø: 115mm 
Steel motor transmission: Pinion: 13T / Spur gear: 49T 
High speed pinion included: Yes 
Pinion module: 1.0 
Length: 535mm 
Width: 310mm 
Height: 175mm 
Weight: 3150g (w/o batteries) 

Stoke Gen2.0 Buggy - 6S Version 
2.4GHz Radio System "CR2SV2" 
Manual 


2x 11.1V LiPo batteries with XT90 plugs (We recommend item 4140041 - LiPo Stick Pack 11.1V-45C 7100 Hardcase XT90) 
Suitable charger (We recommend item 4000013 - Charger APC-1 + item 3040034 XT90 Adaptor) 
LiPo charging bag (We recommend item 9000008 - LiPo Safety Bag) 
Optional programm box for easy setup (Item 2110041) 
4pcs. AA batteries for transmitter